Ways to Fix It When My Phone Does Not Charge
What would you like to do if your phone or battery or other devices are draining? You obviously plug it into a power source. Right? What if you realize your phone is not charging? My phone does not charge and Samsung tablets do not charge is a common problem.
Android devices are very biased to this problem and therefore Android device owners complain often that their phone does not charge even when it is plugged into a power source properly. The reason behind the phone is not charged or the Samsung tablet is not charged is not very complicated and therefore can be dealt with at home.
Charging problems can occur due to temporary crash software. It is also possible that a broken device cache may cause such a glitch. Another reason for phones not to charge normally or slow payments is an inappropriate power source or defective charging cable and adapter.
So if you’re still thinking about why my phone does not charge, read on to find out if the solution to fix my phone will not charge the problem.
Ways To Fix It When My Phone Does Not Charge
Check/Replace the charging cable
Charging cable fray or becoming obsolete after long usage. Therefore, it is advisable to always use the original cable charging device or purchase a good quality cordless cord that will not harm your device or your adapter.
It is also very common to check that the charging tip of the cable which gets connected to the charging port of the device gets damaged and prevents the current from the phone/tablet flow.
Check/Clean Charging Port
The charging port on your device is a small opening where the cabbie’s charging ends are inserted for the current stream on the phone/tablet. Very often we notice that the charging port is blocked with tiny particles of dirt.
Charging the port may also get clogged if the dirt and dust get accrued inside it preventing sensors from receiving and forwarding the current to the device.
The best way to make this problem is to clean the port with a dull pin or a soft feather unused toothbrush. Make sure you clean the port gently and do not damage it or its sensors.
Check/Replace The Charging Adapter
This method is pretty simple and all you need to do is check whether or not the charging adapter is working properly as sometimes the adapter itself is blamed for no charge.
To make sure you are not using a faulty adapter, connect your charging cable / USB to another adapter. If your device charges normally, this means that there is a problem with your adapter and you need to replace it at the earliest to solve my phone will not charge issue.
Try Another Power Source
This technique is more like a quick trick. It actually means to switch from one power source to another or use a better and more appropriate source of power. It is clear that laptops and PCs charge more slowly than a direct power source, ie, a wall socket.
Sometimes, the charging speed is slower and the battery is draining. In such a situation, choose to charge your device by directly plugging it into a wall socket so as not to experience your phone will not charge problem.
Clear Cache Device
Clearing Cache is a great strategy because it cleans your device and all its partitions. By clearing the cache, all undesirable data and files stored on your device will get deleted which may cause glitches in the software of the device that prevents it from recognizing of current.
Follow the steps given below to clear your device’s cache:
- Visit “Settings” and look for “Storage”
- Now tap on “Cached Data”.
- Click “OK” to clear all unwanted cache from your device as shown above.
Try charging your phone after clearing the cache. If your phone does not charge even now, do not worry. There are more ways to help you fight my phone will not charge the problem.
Re-start/Reboot Your Phone/Tablet
Restarting your device to fix why my phone charge error is not a very effective remedy. This way of rebooting your device is not just fixing software glitches but the other but also tackling other factors/operations that can run in the background preventing your device from charging.
Restarting a device is simple and can be done by following the steps given below:
- Press and hold the power button of your device.
- From the options that appear, click on “Restart”/”Reboot” as shown in the picture below.
To restart your device, you can also press the power button for about 20-25 seconds for phones/tablets to reboot automatically.
Download and Install Ampere App
Ampere App can be downloaded from Google Play Store. It is helpful to fix the reasons why my charges are not this error gives you real-time information about your device’s battery consumption, charging status, and other important data.
If the App provides information in green color, it means that all your wetland device is charging normally, however, if the information before you are in orange, you need to take steps to fix the installation, and charge problem.
Install Software Updates
Installing your Android version updates is a good idea because the software is the interface that receives fees from charging the sensor port and provides a command for phones/tablets to charge. People often continue to use older OS versions that cause problems and prevent the device from charging.
To check for and install updates on your device, you need to be connected to WiFi or a cellular network. Next, visit “Settings” and select “About device”. Now click on “Software Update”.
If an update is available, you will be prompted to download it. Follow the instructions provided before you install a new Android OS version on your device.
Factory Reset Your Device
Factory Reset must be done after the scheduled deliberation. Remember to take back-up of all your data and contents in the cloud or external device memory, such as a pen drive before adopting this method since once you have made a factory reset on your device, all media, contents, data, and other files are wiped out, including your device settings.
Follow the steps given below to factory reset your device:
- Visit “Settings” by clicking on the settings icon as shown below.
- Now select “Backup and Reset” and move on.
- At this step, select “factory data reset” and then “Reset Device”.
- Finally, tap on “Erase everything” as shown below to Factory reset your device.
Note: Once the factory reset process is complete, your device will automatically restart and you will have to set it once again.
Replace Your Battery
This should be your last resort to fix my phone will not charge the problem and you should just try to replace your battery if none of the other techniques work. Also, please consult a technician before purchasing and installing a new battery on your device as different phones and tablets have different types of battery requirements.
Conclusion
Finally, fixing the phone is not charging the problem is simple, and therefore there is no need for you to worry that you are not the only one experiencing such an issue.
Other Android users have been tried, tested, and recommended in the methods provided above to resolve the reason why my phone charges or Samsung tablet will not be charged. So go ahead, and try them out now.
